* Sea-Bird SBE 9 Data File:
* FileName = D:\CTD Data\2021\PE21_17_DiMarco_CTD\XR1_OA_S1_2.hex
* Software Version Seasave V 7.26.7.107
* Temperature SN = 1119
* Conductivity SN = 2100
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 24
* System UpLoad Time = Apr 20 2021 18:11:09
* NMEA Latitude = 28 14.71 N
* NMEA Longitude = 091 46.30 W
* NMEA UTC (Time) = Apr 20 2021  18:11:06
* Store Lat/Lon Data = Append to Every Scan
* SBE 11plus V 5.2
* number of scans to average = 24
* pressure baud rate = 9600
* NMEA baud rate = 9600
* surface PAR voltage added to scan
* A/D offset = 2
* Latitude/Longitude added to scan
* GPIB address = 1
* advance primary conductivity  0.073 seconds
* advance secondary conductivity  0.073 seconds
* autorun on power up is disabled
* S>
* System UTC = Apr 20 2021 18:11:09
# nquan = 24
# nvalues = 2                           
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = t190C: Temperature, 2 [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = c1S/m: Conductivity, 2 [S/m]
# name 5 = sbeox0ML/L: Oxygen, SBE 43 [ml/l]
# name 6 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l]
# name 7 = altM: Altimeter [m]
# name 8 = v0: Voltage 0
# name 9 = v2: Voltage 2
# name 10 = timeJ: Julian Days
# name 11 = latitude: Latitude [deg]
# name 12 = longitude: Longitude [deg]
# name 13 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 14 = sbeox1V: Oxygen raw, SBE 43, 2 [V]
# name 15 = oxsolML/L: Oxygen Saturation, Garcia & Gordon [ml/l]
# name 16 = wetCDOM: Fluorescence, WET Labs CDOM [mg/m^3]
# name 17 = sal00: Salinity, Practical [PSU]
# name 18 = sal11: Salinity, Practical, 2 [PSU]
# name 19 = sbeox0ML/L: Oxygen, SBE 43 [ml/l], WS = 2
# name 20 = sbeox1ML/L: Oxygen, SBE 43, 2 [ml/l], WS = 2
# name 21 = sbox0Mm/Kg: Oxygen, SBE 43 [umol/kg], WS = 2
# name 22 = sbox1Mm/Kg: Oxygen, SBE 43, 2 [umol/kg], WS = 2
# name 23 = flag: flag
# span 0 =      2.319,      2.716       
# span 1 =    23.2965,    23.3313       
# span 2 =    23.2964,    23.3335       
# span 3 =   5.317865,   5.321524       
# span 4 =   5.316296,   5.320172       
# span 5 =     4.6989,     4.7034       
# span 6 =     4.8180,     4.8302       
# span 7 =      89.74,      95.45       
# span 8 =     2.8113,     2.8114       
# span 9 =     4.4887,     4.4888       
# span 10 = 110.757898, 110.758044      
# span 11 =   28.24509,   28.24512      
# span 12 =  -91.77184,  -91.77183      
# span 13 =     2.8107,     2.8120      
# span 14 =     2.7178,     2.7224      
# span 15 =    4.83681,    4.83857      
# span 16 =     2.2723,     2.2811      
# span 17 =    36.4447,    36.4451      
# span 18 =    36.4324,    36.4331      
# span 19 =     4.6975,     4.7032      
# span 20 =     4.8165,     4.8301      
# span 21 =    204.689,    204.933      
# span 22 =    209.875,    210.464      
# span 23 = 0.0000e+00, 0.0000e+00      
# interval = decibars: 1                
# start_time = Apr 20 2021 18:11:06 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1119</SerialNumber>
#       <CalibrationDate>17-Mar-20</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.80243624e-003</G>
#       <H>6.65138151e-004</H>
#       <I>2.40209308e-005</I>
#       <J>1.87861749e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2100</SerialNumber>
#       <CalibrationDate>05-Feb-20</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.74530002e+000</G>
#         <H>1.32566792e+000</H>
#         <I>-2.38328774e-003</I>
#         <J>2.33237640e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0461</SerialNumber>
#       <CalibrationDate>11-Feb-20</CalibrationDate>
#       <C1>-4.244351e+004</C1>
#       <C2>4.166578e-002</C2>
#       <C3>1.316300e-002</C3>
#       <D1>3.513100e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.028370e+001</T1>
#       <T2>-2.660010e-004</T2>
#       <T3>4.083110e-006</T3>
#       <T4>2.653090e-009</T4>
#       <Slope>1.00003619</Slope>
#       <Offset>-0.74670</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.281640e-002</AD590M>
#       <AD590B>-9.225620e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>1811</SerialNumber>
#       <CalibrationDate>March 22, 2019</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.85254045e-003</G>
#       <H>6.75849004e-004</H>
#       <I>2.66353389e-005</I>
#       <J>2.13216121e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>3044</SerialNumber>
#       <CalibrationDate>27-Mar-19</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.90177357e+000</G>
#         <H>1.40192825e+000</H>
#         <I>-5.19565512e-005</I>
#         <J>8.39074206e-005</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>3588</SerialNumber>
#       <CalibrationDate>08-Feb-20</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.3474e-001</Soc>
#         <offset>-0.4995</offset>
#         <A>-4.5223e-003</A>
#         <B> 1.9740e-004</B>
#         <C>-2.7831e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.1900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Oxygen, SBE 43, 2 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>3589</SerialNumber>
#       <CalibrationDate>08-Feb-20</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>4.7134e-001</Soc>
#         <offset>-0.5027</offset>
#         <A>-4.4108e-003</A>
#         <B> 1.5951e-004</B>
#         <C>-2.3756e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.3200</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>868DR</SerialNumber>
#       <CalibrationDate>2-15-2021</CalibrationDate>
#       <M>20.1447</M>
#       <B>-1.1563</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>0937</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>14.190</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO CDOM -->
#     <FluoroWetlabCDOM_Sensor SensorID="19" >
#       <SerialNumber>1374</SerialNumber>
#       <CalibrationDate>2/10/20</CalibrationDate>
#       <ScaleFactor>87.000</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.004</Vblank>
#     </FluoroWetlabCDOM_Sensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Fluorometer, Chelsea Aqua 3 -->
#     <FluoroChelseaAqua3Sensor SensorID="5" >
#       <SerialNumber>088-139</SerialNumber>
#       <CalibrationDate>18-06-2019</CalibrationDate>
#       <VB>0.138470</VB>
#       <V1>1.395780</V1>
#       <Vacetone>0.180950</Vacetone>
#       <ScaleFactor>1.000000</ScaleFactor>
#       <Slope>1.000000</Slope>
#       <Offset>0.000000</Offset>
#     </FluoroChelseaAqua3Sensor>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Free -->
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR, Biospherical/Licor -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber></SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ConversionUnits>1</ConversionUnits>
#       <ConversionFactor>1.0000e+000</ConversionFactor>
#       <RatioMultiplier>0.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = May 25 2021 14:26:56, 7.26.7.129 [datcnv_vars = 17]
# datcnv_in = D:\XR1_Reprocessed\XR1_OA_S1_2.hex D:\XR1_Reprocessed\XR1_OA_S1_2.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# datcnv_ox_tau_correction = no
# filter_date = May 25 2021 14:28:57, 7.26.7.129
# filter_in = D:\XR1_Reprocessed\XR1_OA_S1_2.cnv
# filter_low_pass_tc_A = 0.030
# filter_low_pass_tc_B = 0.150
# filter_low_pass_A_vars =
# filter_low_pass_B_vars = prDM
# alignctd_date = May 25 2021 14:29:35, 7.26.7.129
# alignctd_in = D:\XR1_Reprocessed\XR1_OA_S1_2.cnv
# alignctd_adv = c0S/m 0.073, c1S/m 0.073, sbeox0ML/L 3.500, sbeox1ML/L 3.500, sbeox0V 3.500, sbeox1V 3.500, oxsolML/L 3.500                                                                                                         
# celltm_date = May 25 2021 14:29:59, 7.26.7.129
# celltm_in = D:\XR1_Reprocessed\XR1_OA_S1_2.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# loopedit_date = May 25 2021 14:30:30, 7.26.7.129
# loopedit_in = D:\XR1_Reprocessed\XR1_OA_S1_2.cnv
# loopedit_minVelocity = 0.010                                                                                            
# loopedit_surfaceSoak: minDepth = 0.5, maxDepth = 2, useDeckPress = 0                                                    
# loopedit_excl_bad_scans = no
# Derive_date = May 25 2021 14:32:48, 7.26.7.129 [derive_vars = 6]
# Derive_in = D:\XR1_Reprocessed\XR1_OA_S1_2.cnv D:\XR1_Reprocessed\XR1_OA_S1_2.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = no
# binavg_date = May 25 2021 14:33:31, 7.26.7.129
# binavg_in = D:\XR1_Reprocessed\XR1_OA_S1_2.cnv
# binavg_bintype = decibars
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_omit = 0
# binavg_min_scans_bin = 1
# binavg_max_scans_bin = 2147483647
# binavg_surface_bin = yes, min = 0.000, max = 0.000, value = 0.000
# file_type = ascii
*END*
      2.319    23.3313    23.3335   5.321524   5.320172     4.6989     4.8180      95.45     2.8114     4.4888 110.757898   28.24512  -91.77183     2.8107     2.7178    4.83681     2.2723    36.4447    36.4324     4.6975     4.8165    204.689    209.875 0.0000e+00
      2.716    23.2965    23.2964   5.317865   5.316296     4.7034     4.8302      89.74     2.8113     4.4887 110.758044   28.24509  -91.77184     2.8120     2.7224    4.83857     2.2811    36.4451    36.4331     4.7032     4.8301    204.933    210.464 0.0000e+00